Replacement Filters

Sediments

This filter reduces sediment, sand, rust and scale. It is suitable for municipal and well water applications.

Valuetrex 1 Micron VX Series Sediment Cartridge 
Part Number: 1227865-V
VX01- 9 7/8″ 1 Micron SED CARTRIDGE 

  • 9 7/8″ Polypropylene Sediment, 4 Layer Structure
  • 1 Micron Nominal Rating
  • Reduces sediment, sand, silt, rust and scale 
  • Suitable for municipal and well water applications
  • Flow rates: 7-10 gallons per minute
  • Length: 9 7/8″ (251 mm)
  • Outer Diameter: 2-1/2″ (63 mm)
  • Inner Diameter: 1-7/64″ (28 mm)
  • Operating Temperature: 4.4 degrees Celsius to 62.8 degrees Celsius
  • Filter Media: Polypropylene

Valuetrex 5 Micron VX Series Sediment Cartridge
Part Number: 1227867- V
VX05- 9 7/8″ 5 Micron SED CARTRIDGE 

  • 9 7/8″ Polypropylene Sediment, 4 Layer Structure
  • 5 Micron Nominal Rating
  • Reduces sediment, sand, silt, rust and scale 
  • Suitable for municipal and well water applications
  • Flow Rates: 7-10 Gallons per minute
  • Length: 9 7/8″ (251 mm)
  • Outer Diameter: 2-1/2″ (63 mm)
  • Inner Diameter: 1- 7/64″ (28 mm)
  • Operating Temperature: 4.4 degrees Celsius to 62.8 degrees celsius
  • Filter Media: Polypropylene

Valuetrex 5 Micron VX Series Sediment Cartridge
Part Number: 1227868-V-BB
VX05-20″ 5 Micron SED CARTRIDGE

  • 20″ Polypropylene Sediment, 4 Layer Structure
  • 5 Micron Nominal Rating
  • Reduces sediment, sand, silt, rust and scale
  • Suitable for municipal and well water applications
  • Flow rates: 14-20 Gallons per minute
  • Length: 20″ (508 mm)
  • Outer Diameter: 4-1/2″ (113 mm)
  • Inner Diameter: 1-7/64″ (28 mm)
  • Operating Temperature: 4.4 degrees Celsius to 62.8 degrees Celsius
  • Filter Media: Polypropylene 

Valuetrex 5 Micron VX Series Sediment Cartridge
Part Number: 1227867-V-BB
VX05- 9 7/8″ 5 Micron SED CARTRIDGE

  • 9 7/8″ Polypropylene Sediment, 4 Layer Structure
  • 5 Micron Nominal Rating
  • Reduces sediment, sand, silt, rust and scale
  • Suitable for municipal and well water applications 
  • Flow rates: 6-10 Gallons per minute
  • Length: 9 7/8″ (251 mm)
  • Outer Diameter: 4-1/2″ (113 mm)
  • Inner Diameter: 1-7/64″ (28 mm)
  • Operating Temperature: 4.4 degrees Celsius to 62.8 degrees Celsius
  • Filter Media: Polypropylene

 

Carbon Blocks

The carbon block filters are made of high quality activated carbon. It reduces chlorine taste and odors, as well as condition the water before it is treated by the Reverse Osmosis membrane

Pentair Pentek EPM-10 Carbon Block Filter Cartridge

  • Rating: 10- micron (nominal)
  • Fits standard size filter housing
  • Temperature Range: 4.4-82.2 degrees Celsius
  • Reduces: Chlorine taste and odor, bad taste and odor and sediment

Matrikx Carbon Block Filter

Matrikx Pb1 filters, powered by GreenBlock, are made from 100% coconut shell carbon, a renewable and ecologically sustainable material. The carbon is processed into blocks using a unique binder system and proprietary manufacturing techniques to produce filters with a greater number of micro- pores and available carbon surface area, which display superior adsorption capacity and kinetic dynamics. 

  • 0.5 Micron nominal filtration
  • High capacity Chlorine reduction
  • Formulated for cyst and heavy metal reduction 
  • Exceptionally low pressure drop
  • High dirt holding capacity
  • Excellent chemical contaminant reduction 
  • High Absorptive capacity and efficiency 
  • NSF and WQA certification for Material Safety
  • California Prop. 65 compliance 
  • Reduces Chlorine taste and odor, VOC, Cyst and Lead reduction

Matrikx CTO filters, powered by GreenBlock, are made from 100% coconut shell carbon, a renewable and ecologically sustainable material. The carbon is processed into blocks using a unique binder system and proprietary manufacturing techniques to produce filters with a greater number of micro- pores and available carbon surface area, which display superior adsorption capacity and kinetic dynamics.

  • 5 Micron nominal filtration
  • Exceptionally low pressure drop
  • High dirt holding capacity
  • Excellent chemical contaminant reduction
  • High Adsorptive Capacity and efficiency 
  • NSF and WQA certification for material safety
  • California Prop. 65 compliance
Omnipure Carbon Block 
Part Number: OMB934 MAX5
  • 5 Micron filtration
  • Chlorine, taste and odor reduction
  • Service life 10,000 Gal / 1 year
  • Minimal release of carbon fines
  • Made in USA

Watts Activated Carbon Block Filter Cartridge 
Model Number: F109009

  • For chlorine taste and odor reduction in water
  • 100% coconut shell carbon
  • Rated at 5 micron (nominal)
  • High chlorine reduction
  • Fits all standard 10 inch housings

Matrikx CTO filters, powered by GreenBlock, are made from 100% coconut shell carbon, a renewable and ecologically sustainable material. The carbon is processed into blocks using a unique binder system and proprietary manufacturing techniques to produce filters with a greater number of micro- pores and available carbon surface area, which display superior capacity and kinetic dynamics.

  • Carbon block filter for chlorine taste and odor reduction
  • 5 micron nominal filtration
  • Exceptionally low pressure drop
  • High dirt holding capacity 
  • Excellent chemical contaminant reduction
  • High adsorptive capacity and efficiency
  • NSF and WQA certification for material safety
  • California Prop. 65 compliance 

 

Matrikx CTO filters, powered by GreenBlock, are made from 100% coconut shell carbon, a renewable and ecologically sustainable material. The carbon is processed into blocks using a unique binder system and proprietary manufacturing techniques to produce filters with a greater number of micro- pores and available carbon surface area, which display superior capacity and kinetic dynamics.

  • Carbon block filter for chlorine taste and odor reduction
  • 5 micron nominal filtration
  • Exceptionally low pressure drop
  • High dirt holding capacity 
  • Excellent chemical contaminant reduction
  • High adsorptive capacity and efficiency
  • NSF and WQA certification for material safety
  • California Prop. 65 compliance

Membranes

The Reverse Osmosis Membrane is the Heart of the System. The semipermeable R/O membrane is designed to remove a wide variety of both aesthetic and health-related contaminants.

CSM Membrane
Model Number: RE1812-80

  • Permeate Flow Rate GPD (L/day): 80 (303)
  • Salt Rejection (%): 98.0
  • The stated product performance is based on data taken after 30 minutes of operation at the following
  • test conditions:
  • 200 mg/L NaCl solution at 60 psig (0.41 MPa) applied pressure
  • 15% recovery
  • 77 oF (25 oC)
  • pH 6.5–7.0
  • Minimum salt rejection is 96.0%.
  • All elements are vacuum leak tested using the CSM integrity test.
  • Permeate flow rate for each element may vary +15/ -15%.
  • Elements can be supplied as dry or wet-type. Wet-tested elements are soaked in a preservative solution (1.0% food grade SBS) and vacuum sealed in a poly bag. All elements are individually boxed.
  • Membrane type: Thin-film composite
  • Membrane material: Polyamide (PA)
  • Element configuration: Spiral-Wound, Tape Wrapping 
  • Dimensions: 11.73 inch (298 mm) by 1.77 inch (45 mm)

Pentair GRO-75EN TLC Residential Membrane use an industry leading state-of-the-art TLC (Thin Layer Composite) membrane providing high quality water for a broad range of water chemistries. It integrates a 100% dry membrane to help maximize its lifespan and provide enhanced performance to the end user. The GRO-75EN boasts a 50% recovery rate while maintaining a retrofit-able design for easy integration.

  • Double the recovery over standard reverse osmosis elements
  • Rejection performance comparable to standard reverse osmosis elements
  • High rejection stability at high input TDS
  • TLC Thin Layer Composite membrane
  • 100% dry membrane maximizing shelf life
  • Available with or without drain line flow control
  • Capillary style drain line flow control kits available and sized for each GRO model
  • Maximum Pressure: 125 PSI (6.90 bar)
  • Maximum Temperature: 120 degrees F (49 degrees C)
  • pH: 4-11
  • Free Chlorine: 0.1 ppm
  • Flow* GPD (LPD): 75 (284)
  • Rejection: 96
  • Carton Dimensions- Inches (CM): 11.5″ L x 12″ W x 17″ H (29.2 x 30.5 x 43.1)

Waterpia Gold U/F Membrane Filter 12 ” Replacement Filter Cartridge for WATERPIA or other machine that compatible. This U/F membrane filter removes water contaminants such as waterborne microorganism and harmful organic chemicals etc.

Inline Posts

Inline post filters typically clip onto the top of a reverse osmosis system's membrane housing. The post filter removes any chlorine or contaminants missed by the other cartridges or membrane.

Omnipure K-Series K2533-JJ GAC Filter Cartridge, also known as K2533, is commonly installed as post filter for under sink Reverse Osmosis systems. Omnipure inline filter uses 1/4″ quick connect fittings that make filter exceptionally easy to install on copper or plastic water lines.

OMNIPURE K2533-JJ INLINE FILTER FEATURES:

  • Micron Rating: 5 micron
  • Flow: 0.5 GPM
  • Coconut shell Granular Activated Carbon
  • Taste, Odor and Chlorine reduction
  • Filter Life: 1500 gallons
  • Maximum water pressure: 125 PSI
  • Connector: 1/4″ John Guest (push fit) FQC
  • Filter Size: 10″ x 2″ (nominal)
  • Service Life: 1 year / 1500 Gal.
  • Maximum Temperature: 38 degrees C
  • Minimum Temperature: 2 degrees C

Omnipure K-Series K2555-BB Filter Cartridge, is designed for Deionization (DI) or Demineralization- which is a process of removing all dissolved solids from water.

  • Dimensions: 2″ x 10″ (1/4″ FPT)
  • Capacity: 150 Grains of Hardnes
  • Filtration Media: EX-Mixed Bed Ion Exchange Resin
  • Maximum Pressure: 125 PSI
  • Temperature: 30-100°F (2-38°C)
  • Service Flow Rate: 0.5 GPM (1.9 LPM)

Model Number: CL10RO T33/T40

  • Chlorine Taste and Odor Reduction
  • Filter Length: 10″
  • Volume Cubic Inch: 16.6 
  • Service Life Gal. or 1 year: 1500
  • Degree of nominal filtration: 5 microns 
  • Pipe, Size, NPT: 1/8, 1/4, 3/8
  • Reduction class: 1

10″ Inline Re-mineralization – Mineral Stone Cartridge Filter

Part Number: AIC-10M

This cartridge balances the pH and puts essential minerals back into your water that your body can use, as well as give you the refreshing taste of sweet spring water. Mostly used for beverage equipment, reverse osmosis systems, drinking fountains, water coolers, ice machines, refrigerators, coffee makers and other point of use applications.

  • Maximum Flow: 0.75 GPM (2.84 L/min.)
  • Maximum Pressure: 125 PSI (8.61 bars)
  • Maximum Temperature: 100°F. (38°C.)
  • Service Life: 1500 gallons (5678 L) (varies with incoming water conditions)
  • Connections: 1/4″ FNPT (female normal pipe threads) on both ends

The 1/4″ fittings are sold separately or use your current 1/4″ fittings. John Guest/ DMfit… 
Fittings for this unit are available or you can reuse your existing fittings when possible.

 

Alkaline Filters

Alkaline filters are rich in alkalizing compounds, including calcium, potassium and magnesium. Alkaline water has a higher pH level than regular drinking water

Aptera’s pH Alkaline, ORP Adjusting Filter
A special blend of medias including Tourmaline, Super, PI, and Negative ion ceramics, Calcor, Garnet, KDF, and Quartz. 
  • This true alkaline filter uses premium medias that emit far infrared rays, increase pH, lower ORP,  and will give your water a refreshing mineral flavor.
  • The Aptera AlkaMag provides your family with safe, high quality alkaline water. 
  • Includes a neodymium magnetic module. 
  • Flow Rate: .025 GPM to .5 GPM
  • Max Pressure: 80 PSI
  • Max Temperature: 90 degrees F

GAC/Calcite/MgO Filter (Taste/odor and pH Boosting)
Order Number: TOP-3M-102

Refillable GAC with (double Calcite and MgO) PH Boosting Filter de-chlorinates water and boost up the pH level. Filter is refillable and constructed to allow water to enter at one end and pass through the entire length of the water treatment media before exiting out from the other end of the cartridge. The design allows long contact time with minimum channeling or bypass. This filter can be refilled with GAC, Calcite, and MgO media by replacing the used media with the new one.

The Omnipure K2551-JJ is an inline calcite/corosex filter cartridge that is used to boost pH and create an alkaline condition in reverse osmosis treated water. It composed 1/2 Calcite and 1/2 Corosex

  • Dimensions: 11.25″ X 2.125″
  • Replace every 6-12 months
  • Correct acidic/low pH water
  • Service Life: 6 months
  • Maximum Flow: .50 GPM (1.9 LPM)
  • Maximum Pressure: 125 PSIG (8.6 bar)
  • Maximum Temperature 100 F (38 C)
  • Minimum Temperature 35 F (2 C)
  • Available Fittings:
    • JJ = 1/4″ Quick Connect

The Omnipure K2551-BB is an inline calcite/corosex filter cartridge that is used to boost pH and create an alkaline condition in reverse osmosis treated water. The K2551-C/C-BB has a 10″ x 2″ filter body and each end has 1/4″ female threaded ports. Enjoy the improved taste and health benefits of alkaline water.

  • Part Number: K2551-Cal/Mag-KK (3/8″ Quick Connect)
  • Dimensions: 2.0″ x 10″
  • Capacity: 6 months
  • Filtration Media: Calcite & Magnesium
  • Maximum Pressure: 125 PSI
  • Temperature: 30-100°F (2-38°C)
  • Service Flow Rate: 1.0 GPM

Filters

Includes Filter Cartridges, Fluoride Removal and Specialized Inline Water Filters.

ExcelPlus PLA10-01 Poly Pleated Absolute Filter Cartridge

  • 1 Micron absolute filtration
  • Certified to meet or exceed 3-log reduction of cyst-sized particles described in ANSI-NSF Standard 53.
  • Materials FDA grade, listed for use in potable water and liquid food applications.
  • Max. Temperature of 65 degrees C
  • Fits most 10″ housings.
The Aries AF-10-1091 Bone Char Fluoride Reduction Cartridge is designed to reduce fluoride, radioactive isotopes, heavy metals, and chlorine. In some parts of the country there are high levels of fluoride that occur naturally, and fluoride is also added to most municipal water supplies. The 100% bone char used in the Aries AF-10-1091 is FDA approved and is Kosher Certified 100% organic.
  • FDA Approved: 100% bone char 
  • Fits 10″ Standard or Slimline Housings
  • Made in the USA
  • Length: 10″
  • Diameter: 3″
  • Flow Rate: 1 gpm
  • Capacity: 825 ppm

The Watts 9.75″ x 2.75″ Activated Carbon GAC Filter Cartridge (GAC-10N) is a water washed (WW) granular activated coconut carbon water filter replacement cartridge used to reduce the bad taste and odor of chlorine. It works in a variety of low-flow applications such as under sink, countertop, and pre/post-reverse osmosis filtration systems for more advanced water filtration.

  • Great dirt holding capacity
  • Maximizes carbon capacity & maintains a low pressure drop

Removes :

  • Chlorine
  • Bad Taste & Odor
  • Turbidity
  • THMs
  • Dirt
  • Sediment

Specifications:

Model #:GAC-10N
Micron Rating:10 Nominal
Dimensions:9.75″ x 2.75″
Weight:1 lb 2 oz
Flow Rate:0.75 GPM
Filter Media:Coconut Shell
Filter Life:2,500 Gallons Chlorine Removal

The Pentek GS-10CAL/RO is an inline filter cartridge comprised of a mix of coconut-based granular activated carbon (GAC) and Calcite. This cartridge is typically used for residential RO applications where water polishing and remineralizing are desired. The GS-10CAL/RO has a 2″ x 10″ filter body and each end has a 1/4″ female threaded port. Enjoy the improved taste and health benefits of remineralized water.

  • Part Number: 255541-43 
  • Model Number: GS-10CAL/RO-B
  • Dimensions: 2″ x 10″
  • Nominal 20 micron rating
  • Connection: 1/4″ FPT (female pipe thread)
  • Volume: 0.37 cubic ft.
  • Post RO, pH stabilizer filter, 
  • Chlorine, bad taste and odor reduction
  • Case Quantity: 12 Filters
  • NSF Certify
  • Service Life: 2,000 gallons (7,570 L) or 1 year
  • Flow Rate: 1.0 gpm (3.8 L/min)
  • Temperature Range: 4.4-37.8 degrees C
  • Pressure Range: 20-125 psi (1.4-8.62 bar)

The Pentek GS-210-B-1/4″ FPT Inline Water Filter is a Bituminous Granular Activated Carbon filter that is part of the Gold Series of Pentek inline filtration filters. This 20 nominal micron filter is designed with a 1/4″ female pipe thread (FPT). Also known as part number 255507-43, the Pentek Water Filter includes a pre-filter and post-filter. It is injection molded and pressure rated to 125 psi (8.62 bar).

Pentek Inline Water Filter Cartridge specifications:

  • Part 255507-43
  • GS-210-B-1/4″ FPT
  • 20 nominal micron filter  
  • Dimensions: 2 1/2″ x 11″
  • Volume Capacity: 0.61 cubic feet
  • Pressure Rate: 125 psi (8.62 bar)
  • Use on any point-of-use drinking water appliances
  • Service Life: 3,500 gallons (13,248 L)
  • Flow Rate: 1.0 GPM (3.8 L/min)
  • Temperature range: 4.4-37.8 degrees C

The Pentek Inline Water Filter Replacement Cartridge is designed to fit any point-of-use drinking water appliances such as reverse osmosis (RO) systems, coffee makers, espresso brewers, food service equipment, ice machines, distillation systems, misters, water fountains, refrigerators, bottle-less water coolers and other drinking water dispensing appliances.

For more information about Reverse Osmosis/Alkaline Water Under the Sink and Counter top filtration systems, click here.

For Pricing and Inquiries, contact us here.

Close Menu